Intégration Guide_iUP250&iUR250 73/83 Copyright © 2012 Ingenico
900009151 R11 000 01/1223 All rights reserved
9.3 REACTIVATION
iUR250 can be opened for maintenance (cleaning operation, extraction of jammed
object for example).
The reactivation process can be achieved with a tool terminal and two smart cards
with pin codes. (For more information, contact commercial department of Ingenico)
On the iUR250 if reactivation process fails, check that the application has been re-
charged and re-attempt.
If the red LED is lit, it may be a case of permanent tamper detection. Check in this
case that the product is correctly assembled and re-attempt.
If the problem persists, it may be a hardware problem (broken switch...). In this case,
a shipment repair is needed.
9.4 OPERATING LIFE
Minimum operating life of 5 years.
Keyboard
o 1.000.000 key strokes
o Keys markings ensure resistance to wear
Reader
o 500.000 card insertions
To Next Page
Loading...
