Ingenico iUP 250 - TELIUM MANAGER Functions

Intégration Guide_iUP250&iUR250 41/83 Copyright © 2012 Ingenico
900009151 R11 000 01/1223 All rights reserved
3.1.4 TELIUM MANAGER
The main functions offered by the manager are the following:
 Application management
 Terminal initialization
 Terminal maintenance
 Card Recognition and routing to the applications
When the EMV DC module is present, it selects the applications:
 EMV applications (EMV level 2 compliant)
 Non-EMV applications
In France, it is compatible with the following environments
 Health system
 French banking system
 "Private applications"
Terminal initialization
Required operating conditions
To operate, the system unit has to be equipped with its system, the application
manager, the UCMC and at least one application.
If no application is initialized, the application manager displays a message requesting
initialization for an application (in maintenance mode).
If at least one application is initialized, the terminal is operational. The application
manager then waits for an event to poll the applications loaded in the terminal.
Initialisation of common parameters (in maintenance mode)
The application manager is used to initialize the common parameters:
Date, time, message display language, IP network configuration data, local loading or
remote diagnostics.
System unit maintenance (in maintenance mode)
The system unit has maintenance functions.
 Properties
 Local downloading
 Diagnostics
Properties
The properties function is used to obtain the following information:
 List of applications loaded in terminal, version number, checksum, etc. The
application manager gives this information for itself and for the operating
system.
 Application call time: remote collection, loading, etc.
 Total number of transactions in each application file contained in system unit.