Ingenico iUP 250 - RGB Leds; Iur250 Optional Lever Lock

Intégration Guide_iUP250&iUR250 31/83 Copyright © 2012 Ingenico
900009151 R11 000 01/1223 All rights reserved
1.3.2.2.3 COM0 link
The IUR250 serial port COM0 is only available for debug feature and to manage
wake-up mechanism. The connector type is RJ11.
Pin N°
Function
1
GND
2
Wake-up
3
RXD (Not for customer use)
4
TXD (Not for customer use)
5
CTS (Not for customer use)
6
RTS (Not for customer use)
1.3.2.3 RGB Leds
The iUR250 contains RGB leds controlled by applications.
Red led is used to indicate the following priority information:
· Red led on steady: product has been tampered (Key erased, irruption).
· Red led flashing slowly: product is disabled (Keys erased, no irruption).
· Red led flashing quickly: product is out of order (Commissioning needed).
1.3.2.4 iUR250 Optional Lever Lock
The Lever lock is controlled by application.
It may be used to forbid the withdrawal of the card during chip access.