Ingenico iWL220 - Page 29

28
Roaming SIM Installation Instructions (continued)
TERMINAL DISPLAY
DESCRIPTION
Enter 145 and press ok
To toggle between uppercase, lowercase and numbers you must press F4.The display in
the bottom right hand corner will show your choice.
Using the letters on the KeyPad enter m2m.tns.int1and then press OK.
This setting has been stored in the terminal. Press the RED button on the keypad to
return to the READY screen
To reboot your terminal, turn it off by pressing the circled buttons together
Switch your terminal back on and the terminal is now ready to take the next transaction
(if applicable)