InHand Edge Computer EC300 Series User Manual

1 Introduction
This user's manual is for the Arm architecture based edge computer EC300
and covers a complete set of instructions for all supported models. Before
referring to these chapters, verify that the hardware specifications of
your computer model support the features/Settings covered.
2 Hardware installation instructions
In this chapter, we will cover the external interface instructions of EC300,
an edge computer based on Arm architecture.
2.1 Introduction
The following sections describe the application of external connectors and
pin assignment.
2.2 EC300 panel
2.2.1 Front panel

InHand Edge Computer EC300 Series Specifications

General

Brand	InHand
Model	Edge Computer EC300 Series
Category	Network Router
Language	English