3.3 Network administration and system
administration
The EC300 is based on debian 11, so it can use native Linux commands for network
management and system administration. In order to facilitate user configuration,
InHand has developed a set of IEOS system programs, providing a web interface,
users can easily through the web network management and system management, but it
should be noted that when the IEOS function is enabled, IEOS will take over the
network management and system management. At this time through the Linux native
command for network management and system management may fail. IEOS is enabled by
default, if users need to perform network management and system management based
on Linux native command line, they need to close IEOS first.
3.3.1 Web management based on IEOS
IEOS is a set of network management and system management program running on Linux
system developed by InHand. IEOS provides web interface, users can access Ethernet
port ip address, cellular dial-up, Wi-Fi Station, DHCP Client/Server, static
routing, and network management through the web. Firewalls and other network
configuration; System time, time zone, firmware upgrade and system restart can
also be operated; In addition, IEOS also supports docking with device management
platform DeviceLive. Users can remotely monitor and manage EC300 devices through
DeviceLive platform.
IEOS adopts the design scheme of status and configuration separation, which is
divided into three functional sections: network management, system management and
status. The network management menu and the system management menu can only be
used for network and system related configuration, and the status information
needs to be unified to the status page.
Important note: When using IEOS program to manage network configuration and system
configuration, if you use Linux native commands at the same time, the two may
affect each other, resulting in abnormal running state. It is recommended that the
To Next Page
Loading...
Need help?
General
