12
3 Login Web Setting Page
This chapter mainly contains the following contents:
Preparations
Login the Web Setting Page of Router
3.1 Preparations
After the hardware installation and before login the Web setting page of router, you are required
to ensure that the supervisory computer and network meet some basic requirements.
3.1.1 Requirements on Supervisory Computer
Please confirm that the supervisory computer has been installed with an Ethernet card.
3.1.2 Establish Network Connection
1. Set IP Address of Supervisory Computer
Automatic acquisition of IP address (recommended): Please set the supervisory computer to
"automatic acquisition of IP address" and "automatic acquisition of DNS server address"
(default configuration of computer system) to let the router automatically assign IP address for
supervisory computer.
Set a static IP address: Please set the IP address of supervisory computer and IP address of
LAN port of router in the same network segment (default IP address of LAN port: 192.168.2.1;
subnet mask: 255.255.255.0). The operating steps are as follows (taking Windows XP system
as an example):
To Next Page
Loading...
