InHand IR720 series User Manual

8
1 What do you want to know?
Preliminary acquaintance of the general form of
product, business characteristics or its positioning in the
actual network applications
“Product Overview”
Manage device through setting Web environment and
further get familiar with its setting page
“Login web setting page" and "Get
familiar with the web setting page”
Set device management module through the Web
setting page, e.g. management access, system upgrade,
etc.
"Management"
Set layer 2 switching function through the Web setting
page, e.g. Spanning Tree Protocol, mac address table,
etc.
“Layer 2 switching”
Set network function module through the Web setting
page, e.g. dial-up, dhcp service, etc.
"Network"
Set link backup through the Web setting page, e.g.
VRRP, interface backup, etc.
“Link backup”
Set device routing function through the Web setting
page, e.g. static routing, dynamic routing, etc.
“Route”
Configure firewall function for the device through the
Web setting page, e.g. ACL, NAT, etc.
“Firewall”
Configure QOS through the Web setting page, e.g. layer
2 QOS and flow control
“QOS”
Configure VPN through the Web setting page, e.g.
IPSec, GRE, DMVPN, etc.
“VPN”
Use tools through the Web setting page to facilitate the
positioning
“Tools”
Further understand the key characteristics of device
through specific typical networking examples
“Typical networking configuration
examples”
Maintain the device in a simple way through the
command line
“Appendix - setting of command line”
Position or eliminate problems encountered in the use
of the device
“Appendix - Troubleshooting”
Get the default factory configuration information of
equipment
“Appendix - Default Settings”

InHand IR720 series Specifications

General

Brand	InHand
Model	IR720 series
Category	Network Router
Language	English