38
6.3.2 Configure Port Security
Click the row to configure security feature on the port. For example, we’ll enable port security on
FE1/1 and configure the number of Max Secure Mac is 1, Secure MAC address is 0000.0000.0001,
then the port only forward ingress traffic that has source addresses 0000.0000.0001. Here is the
configuration page:
The meaning of key items is as shown as following
To start port security functionality
set the maximum number of secure MAC
addresses on a port,
The VLAN ID of MAC address
Set the secure MAC address
6.4 802.1x
802.1X is based on the Extensible Authentication Protocol (EAP). Full network access is only
granted once the user is positively identified. Obtaining this verification early in the network
connection process allows for much finer access controls because users can be classified and
restricted before obtaining network access.
Before set up 802.1X, make sure that you have defined the Radius Server through
AdministrationAAARadius.
6.4.1 Display 802.1x configuration
Page Wizard: Layer2 Switch 802.1x
To Next Page
Loading...
