InHand IR720 series - Page 43

43
7.1.2 Configure VLAN Parameters
Page Wizard: Network VLANConfigure VLAN Parameters
By default, all LAN IP addresses are belong VLAN 1.
Click Add to create a new VLAN, and configure the VLAN ID, Primary IP, etc
After Apply & Save the page shows current VLAN in router.
The meanings of key items in the page are shown in the table below..
Key Items
Description
VLAN ID
The range is from 1 to 4094
Priority
VLAN priority, the range is <0-7>
Mode
Access: when it is access mode, port only
have untagged attribute, that means the
port is permitted to belong to only one
VLAN.