ID originating from the router of this LSA.
Dead Time. If no Hello packet is received from the neighbors,
the neighbor is considered failed. If dead times of two adjacent
routers are different, the neighbor relationship can not be
established.
ID of the area in which the router originating from the LSA is
located
By default, the interface automatically calculates overhead in
accordance with the current bandwidth.
Send interval of Hello packet. If the the Hello time between two
adjacent routers is different, you can not establish a neighbor
relationship.
Since there may be multiple routing protocols simultaneously
running on the router, there is the problem of routing information
share and selection among routing protocols. The system sets a
priority for each routing protocol. When the same routing is
found in different protocols, the routing with higher priority will
be preferentially selected.
LSA retransmission delay timer
When the router notifies an LSA to its neighbor, it is required to
make acknowledgement. If no acknowledgement packet is
received within the retransmission interval, this LSA will be
retransmitted to the neighbor.
To Next Page
Loading...
