INNO Instrument View 8+ - Selecting a Splice Mode

User’s Manual
INNO Instrument, Inc.
17
PAGE
VIEW8+
has an intuitive and simple but very powerful program structure to operate.
Splice programs dene arc currents, splice times as well as various parameters
used when performing a splice. Therefore, it is essential to select the correct
splice program. There are a number of “Preset” splice programs for common
ber combinations. Therefore, it is much easier to modify and further optimize the
parameters for more unusual ber combinations.
Displaying the Active Splice
The active splice program is always displayed at the top of the screen (see below).
Displaying the active splice program
Chapter 4 Splice Mode