INNO Instrument View 8+ - Selecting and Editing Heat Modes; Selecting Heat Mode; Editing Heat Mode

User’s Manual
INNO Instrument, Inc.
24
PAGE
The splicer provides max 32 heat modes including 6 heat modes preset by INNO
Instrument and the rest that can be dened by users.
Select a heating mode that best matches with the protection sleeve used.
For each type of protection sleeve, VIEW8+ has its optimum heating mode. These
modes can be found in the database area for reference. Copy the appropriate mode
and paste it to the user–programmable area. Users can edit those parameters.
Select [Select Heat Mode] in [Heater Mode] menu.
Chapter 6 - Heater Mode
Selecting Heater Mode
① Select [Heater Mode]
menu.
② Select [Select Heat
Mode].