User’s Manual
INNO Instrument, Inc.
33
PAGE
This splicer stores up to 10,000 splicing results. Contents of data stored are
different depending on splicing mode.
Splicing results stored in the memory can be displayed. Enter [Data Storage] Menu
and Select [Display Splice Record] to view.
Splicing results can be cleared by part or whole.
①
Select [Delete Splice Record], and then input specic number (begin-number
and end-number) of splicing results to be cleared.
②
Select [Reset Splice Record].
If you don’t want to store the records, select [OFF] in the [Splice Data Save] option.
Data Storage
Display Splice Record
Delete Splice Record
Cancel Data Storage
To Next Page
Loading...