A
B
6.1
6.2
On-board speed selector for connecting to standard thermostat.
LED indications
The command is for switching on and off and selecting the
4 speeds directly from the fan coil.
Switching on and off takes place via closing of the external
thermostat contact.
The control panel has a memory, so settings will not be lost
if the appliance is switched off or in the power supply is cut.
Controls cannot be installed on the SLI and RSI versions.
After 20 seconds from the last action, the LED brightness
will be reduced for improved night-time comfort. Press
any key to restore maximum brightness.
The 5 LEDs display the operational states:
Minimum speed selected
Medium speed selected
Maximum speed selected
Supersilent function selected
Fan coil off or TA contact open (flashing)
Warning Led
speed selection key
B3V137
To Next Page
Loading...
