Inovance MD280 Series - Page 132

Parameter Description MD280/MD280N User Manual
- 132 -
by the FWD and REV terminal commands. The descriptions on the terminal
running command are as shown in Fig. 6-5:
K1 K2
Running Direction
Selection
0 0 Stop
1 0 Forward Rotation
0 1 Reverse Rotation
1 1 Stop
Fig6-5 Two-line Running Mode 1
1: Two-line running mode 2: FWD terminal serves as running enable
terminal, and the running direction depends on the status of REV terminal,
while the stop command is performed by disconnecting the FWD terminal.
The descriptions on the terminal running command are as shown in Fig.
6-5:
K1 K2 Running Direction
Selection
0 0 Stop
0 1 Stop
1 0 Forward Rotation
1 1 Reverse Rotation
Fig.6-6 Two-line Mode Running Mode 2
1: Three-line running mode 1: DIn terminal serves as running enable
terminal, and the forward/reverse rotation is controlled by FWD and REV
terminals respectively, with actibe rising edge, while the stop command is
performed by disconnecting the DIn terminal. The descriptions on the
terminal running command are as shown in Fig. 6-7:
MD280
FWD
COM Digital public terminal
REV
Digital input terminal
Digital input terminal
DIn Three-line mode running
control terminal
SB1
SB2
SB3
Fig6- 7 Three-line Mode Running Mode 1
MD280
FWD
COM
Digital public terminal
REV
Digital input terminal
Digital input terminal
K1
K2
MD280
FWD
COM
Digital public terminal
REV
Digital input terminal
Digital input terminal
K1
K2
efesotomasyon.com