Mechanical Installation
‑26‑
Figure 1‑12 Mounting the guide rails to the cabinet
4. Remove the cover from the AC drive.
For details, see "
1.2.4.1 Removing the Cover
"
on page 28
. After the cover is
removed, the auxiliary handle will be exposed.
5. Align the casters of the AC drive with the guide rails and gently push the AC drive in‑
to the cabinet.
During the push‑in or pull‑out process, use the auxiliary strap to prevent the drive
from toppling over. It is recommended that two people work together.
Figure 1‑13 Aligning the casters with the guide rails
To Next Page
Loading...
