EasyManuals Logo

Inovance SV670P Series Installation Guide

Inovance SV670P Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
‑9‑
General Safety Instructions
Perform routine and periodic inspection and maintenance on the equipment according
to maintenance requirements and keep a maintenance record.
Repair
Equipment installation, wiring, maintenance, inspection, or parts replacement must be
performed only by professionals.
Do not repair the equipment with power ON. Failure to comply will result in an electric
shock.
Before inspection and repair, cut off all the power supplies of the equipment and wait
for at least the time designated on the equipment warning label.
Submit the repair request according to the warranty agreement.
When the fuse is blown or the circuit breaker or earth leakage current breaker (ELCB)
trips, wait for at least the time designated on the equipment warning label before
power‑on or further operations. Failure to comply may result in death, personal injuries
or equipment damage.
When the equipment is faulty or damaged, the troubleshooting and repair work must be
performed by professionals that follow the repair instructions, with repair records kept
properly.
Replace quick‑wear parts of the equipment according to the replacement instructions.
Do not use damaged equipment. Failure to comply may result in death, personal
injuries, or severe equipment damage.
After the equipment is replaced, check the wiring and set parameters again.
Disposal
Dispose of retired equipment in accordance with local regulations and standards.
Failure to comply may result in property damage, personal injuries, or even death.
Recycle retired equipment by observing industry waste disposal standards to avoid
environmental pollution.
Additional Precautions
Dynamic brake
Dynamic braking can only be used for emergency stop in case of failure and
sudden power failure. Do not trigger failure or power failure frequently.
Ensure that the dynamic braking function has an operation interval of more than 5
minutes at high speed, otherwise the internal dynamic braking circuit may be
damaged.

Other manuals for Inovance SV670P Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Inovance SV670P Series and is the answer not in the manual?

Inovance SV670P Series Specifications

General IconGeneral
BrandInovance
ModelSV670P Series
CategoryServo Drives
LanguageEnglish

Related product manuals