机械安装
‑25‑
No.
Description
Yes
3
All screws are in position and tightened.
□
4
The signal terminal is free from fracture, foreign objects and bent
pins.
□
5.3 Installing the Absolute Encoder Battery
The optional S6‑C4A battery box contains the following items:
● One plastic case.
● One battery (3.6 V, 2,600 mAh).
● Terminal block and crimping terminal.
Installing the battery box
Figure 5‑1 Installing the battery box (bottom view)
Removing the battery box
The battery may generate leakage liquid after long‑term use. Replace it every two
years. Remove the battery box in steps shown in the preceding figure, but in the
reverse order.
When closing the battery box cover, prevent the connector cable from being pinched.
To Next Page
Loading...
