Inovance SV670P Series - Post-Inspection

电气安装
‑38‑
Table 6–4 Description of the power cable connector (motor side)
Flange Size
[1]
Outline Drawing of the
Connector
Terminal Pin Layout
Pin No.
Signal Name
Color
180
F
A
E
DB
C
MIL‑DTL‑5015 series 3108E20‑
22S military‑spec connector
A U
Blue
C V
Black
E W
Red
F PE
Yellow/
Green
B
Brake
(polarity
insensitive)
Red
D
Black
Note
● [1] The flange size refers to the width of the mounting flange.
● Power cable colors are subject to the actual product. All cable colors mentioned in
this guide refer to Inovance cable colors.
6.4 Post-Inspection
Table 6–5 Inspection Checklist
No.
Description
Yes
1
The power input terminals (L1C, L2C, L1, L2, L3, R, S, T) of the
servo drive are connected properly.
□
2
P⊕, D, C and N⊖ are connected correctly.
□
3
The main circuit cables (U, V, W) of the motor are connected to
the U/V/W terminals of the drive correctly.
□
4
No short circuit exists in the power input terminals (L1, L2, L3, R,
S, T) or main circuit output terminals (U, V, W) of the servo drive.
□
5
The stress suffered by the cable is within the specified range.
□
6
The servo drive and servo motor are grounded properly.
□
7
All the wiring terminals are insulated properly.
□