Inovance SV670P Series - Communication Cable Selection

电气安装
‑36‑
6.3 Wiring with the Motor
V
U
Figure 6‑4 Wiring between the servo drive and terminal‑type motor
To avoid flying start, ensure that the phase sequence is correct.
Table 6–1 Description of the power cable connector (motor side) for terminal‑type motors
Flange Size
[1]
Outline Drawing of the
Connector
Terminal Pin Layout
Pin No.
Signal Name
Color
Terminal‑
type:
40
60
80
Black 6‑pin connector
1 PE
Yellow/
Green
2 W
Red
3 V
Black
4 U
White
5
Brake (polarity
insensitive)
Brown
6
Blue