Precautions
‑11‑
1 Precautions
● Observe the installation direction described in this guide. Failure to comply may
result in equipment fault or damage.
● Do not install or operate damaged or defective equipment. Failure to comply will
result in physical injury.
● Do not install the equipment in environments exposed to water splashes or
corrosive gases. Failure to comply will result in equipment fault.
● Do not install the equipment near inflammable gases or combustible objects.
Failure to comply will result in a fire or electric shock.
● Install the equipment inside a fire‑proof cabinet that provides electrical
protection. Failure to comply may result in a fire.
● Reserve specified clearance between the servo drive and its adjacent machines
and the interior surface of the control cabinet. Failure to comply will result in a fire
or equipment fault.
● Do not put heavy objects on the equipment. Failure to comply may result in
physical injury or equipment damage.
● Do not impose large impact on the equipment. Failure to comply may result in
equipment damage.
● Do not block the air inlet/outlet of the equipment or allow unwanted objects to
fall into the equipment. Failure to comply may result in a fire or equipment fault.
To Next Page
Loading...
Need help?
General
