Preparation
‑15‑
Figure 3‑2 Clearance for side‑by‑side installation
Servo drives rated at 0.2 kW to 0.4 kW support compact installation, in which a
clearance of at least 1 mm (0.04 in.) must be reserved between every two servo drives.
.When adopting compact installation, derate the load rate to 75%.
Figure 3‑3 Clearance for compact installation
Servo drives rated at 0.75 kW to 7.5 kW support zero‑clearance installation between
every two servo drives, without the need for derating.
To Next Page
Loading...
