‑6‑
General Safety Instructions
● Handle the equipment with care during transportation and mind your steps to prevent
personal injuries or equipment damage.
● When carrying the equipment with bare hands, hold the equipment casing firmly with
care to prevent parts from falling. Failure to comply may result in personal injuries.
● Store and transport the equipment based on the storage and transportation
requirements. Failure to comply will result in equipment damage.
● Avoid storing or transporting the equipment in environments with water splash, rain,
direct sunlight, strong electric field, strong magnetic field, and strong vibration.
● Avoid storing the equipment for more than three months. Long‑term storage requires
stricter protection and necessary inspections.
● Pack the equipment strictly before transportation. Use a sealed box for long‑distance
transportation.
● Never transport the equipment with other equipment or materials that may harm or
have negative impacts on this equipment.
Installation
● The equipment can be operated by well‑trained and qualified professionals only. Non‑
professionals are not allowed.
● Read through the guide and safety instructions before installation.
● Do not install this equipment in places with strong electric or magnetic fields.
● Before installation, check that the mechanical strength of the installation site can bear
the weight of the equipment. Failure to comply will result in mechanical hazards.
● Do not wear loose clothes or accessories during installation. Failure to comply may
result in an electric shock.
● When installing the equipment in a closed environment (such as a cabinet or casing),
use a cooling device (such as a fan or air conditioner) to cool the environment down to
the required temperature. Failure to comply may result in equipment over‑temperature
or a fire.
● Do not retrofit the equipment.
● Do not fiddle with the bolts used to fix equipment components or the bolts marked in
red.
● When the equipment is installed in a cabinet or final assembly, a fireproof enclosure
providing both electrical and mechanical protections must be provided. The IP rating
must meet IEC standards and local laws and regulations.
● Before installing devices with strong electromagnetic interference, such as a
transformer, install a shielding device for the equipment to prevent malfunction.
● Install the equipment onto an incombustible object such as a metal. Keep the
equipment away from combustible objects. Failure to comply will result in a fire.
To Next Page
Loading...
Need help?
General
