25
NS-20ED310NA15 20" 720p 60Hz LED DVD Combo TV
www.insigniaproducts.com
Connecting a computer
You can connect a computer using:
•HDMI (best)
• VGA (good)
HDMI (best)
1 Make sure that your TV’s power adapter is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the computer.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S or T to highlight HDMI 1 or HDMI 2, then press OK.
6 Adjust the display properties on the computer, if necessary.
HDMI cable
Side of TV
HDMI cable
connector
HDMI jack
On your TV
Note
You can also press HDMI to select the computer.
To Next Page
Loading...
