29
NS-20ED310NA15 20" 720p 60Hz LED DVD Combo TV
www.insigniaproducts.com
Connecting external speakers or sound bar
You can connect external speakers or a sound bar using:
• Digital audio
•Analog audio
Digital audio
1 Make sure that your TV’s power adapter is unplugged and the external speaker system or sound bar is turned off.
2 Connect a digital coaxial audio cable (not provided) to the DIGITAL OUTPUT (Coaxial) jack on the back of your TV
and to the optical AUDIO IN jack on the digital home theater system or sound bar.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
4 Turn on the external speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the external speakers system or sound bar.
5 On your TV’s Audio menu, highlight Digital Audio Format / Audio Delay, then press OK or
X. Set the Audio Format
option to to PCM. See the Digital Audio Format / Audio Delay option in Adjusting sound settings on page 53.
Digital coaxial
audio cable
External speaker system
Back of TV
Digital coaxial
audio cable
connector
Digital
coaxial audio
jack
On your TV
Sound bar
To Next Page
Loading...
