35
NS-20ED310NA15 20" 720p 60Hz LED DVD Combo TV
www.insigniaproducts.com
Turning on your TV for the
first time
The first time you turn on your TV, the Easy Setup
wizard opens. The wizard guides you through setting
up basic settings including the menu language, time
setting, picture mode, TV signal source, and the
channel list.
1 Make sure that you have:
• Installed the remote control batteries. (See
page 33.)
• Connected an antenna, cable TV, or satellite TV.
(See page 14 through page 18.)
• Connected the power adapter. (See page 32.)
2 Press (power) to turn on your TV. The Easy Setup
wizard opens.
3 Press
S or T to highlight a language, then press
OK.
4 Press
W or X to highlight Home Use Mode or
Store Display Mode, then press OK.
If you selected Store Display Mode, a message
asks if you are sure you want this mode. Select OK
to continue using Store Display Mode, or select
Cancel to automatically change to Home Use
Mode. Store Display Mode is not an energy
savings mode and will display a retail banner.
5 Press
W or X to highlight an option, then press OK.
You can select:
• Watch TV to skip the customizing options. You
can press TV-MENU later to customize settings.
Go to Finish the wizard on page 36.
• Customize my TV to set options to maximize
your experience. Go to Customize my TV on
page 35.
Customize my TV
6 Press
S or T to highlight a time zone, then press
OK.
To Next Page
Loading...
