14
NS-SBAR21F20
www.insigniaproducts.com
3 Go to Connecting the AC power on page16.
4 After your soundbar is plugged in and turned on, press the SOURCE
button repeatedly on your soundbar or remote control until the
source indicator turns yellow.
USB sound source
1 Plug a USB thumbdrive (with WAV files) into the USB port on the back
of your soundbar. FAT16/FAT32/ ExFAT/Fat64 files are acceptable.
2 Go to Connecting the AC power on page16.
3 After your soundbar is plugged in and turned on, press the SOURCE
button repeatedly on your soundbar or remote control until the
source indicator turns purple.
4 Control USB playback by pressing the (play/pause), (previous),
and (next) buttons on the remote control.
Important: Make sure that the device you connect and select as your sound
source is outputting sound to the soundbar. See your device's user manual for
more information.
Note: If you mount your soundbar on a wall, you will not be able to use a USB
thumbdrive as a sound source.
Note: If playback does not begin immediately, press the (play/pause)/
PAIR button on the remote control.
RCA cable (included)
Audio source (TV, Blu-ray
player, or cable box)
Back of the soundbar
OR
RCA cable (included)
3.5mm to RCA cable
adapter (included)
Audio source with 3.5mm
jack (smartphone, tablet,
iPad)
To Next Page
Loading...
