IMPORTANT
WARNINGS WHEN USING THE
Auto_SCB
™
DO NOT attempt any repairs while the unit is
powered on.
CAUTION DISCONNECT the unit from wall
power before attempting any repairs.
DO NOT operate this device without prior
training.
DANGER DO NOT insert any part of your body
between the ram and crosshead to prevent
crushing injuries.
Follow all your other related facility safety
instructions while operating this device.
Maintenance on this device must be done
by trained technicians.
Call InstroTek, Inc. (919-875-8371) if you have
any questions or before attempting any
repairs.
DO NOT USE the 10kN Load Cell for TSR testing. Please
contact InstroTek for information on different load cells and
accessories for the Auto_SCB.
IMPORTANT
To Next Page
Loading...