Default Buddy DesktopMic Button Configuration
When shipped, Buddy DesktopMic 7G button is by default set for the following
function:
Button1 (
Click Microphone mute
The default LED settings are:
LED 1 Green when plugged into USB
LED 2 Blinking Blue when muted
Reconfiguring Buddy DesktopMic Button
While the default Buddy DesktopMic button setting is useful as-is for many
persons and applications, some will want the button set to perform different
function.
Some may want the button optimized for navigating a custom
application. Others may want the button to generate common
text. Whatever the need, the button actions can be changed using the
MyBuddyMic software.
To make changes, download the MyBuddyMic software, install it and run it,
then use it to modify the settings. You can create separate “profiles” so that
you can easily change from one set of button definitions to another.
The MyBuddyMic software can be freely downloaded at
http://www.BuddyMicrophones.com
Instructions for configuration and use are included in the MyBuddyMic
software.
Most of the MyBuddyMic settings, including text and keyboard actions, are set
on the microphone itself so do not require that any other software be run
once set. The Dragon actions available with the MyBuddyMic software require
that the MyBuddyMic software run while the buttons are in use.
More detailed instructions for using the Buddy DesktopMic buttons are at
http://www.BuddyMicrophones.com.
To Next Page
Loading...
Need help?
General