EasyManuals Logo

Integra DRX-2 User Manual

Integra DRX-2
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
> Before start > Hookup > Setup > Playback > Part Names
3´ (0.9 m)
or more
16
(
Ä
P3)
78
Height Speakers
Choose one of the following:
$
$
Front High Speakers
Rear High Speakers
For 7.1-Channel System
(with Height Speakers-A)
Front High or Rear High speakers
This is a basic 5.1-channel system with the addition of
height speakers, either as front high speakers or rear high
speakers. Select which speakers to setup according to
the environment of the room. You can select the Dolby
Atmos listening mode (5.1.2 channel playback), which
realizes the most up-to-date 3D surround sound including
overhead sounds, when the input format is Dolby Atmos.
With formats other than Dolby Atmos, you can still create
a sound field by outputting sound from the height
speakers when you select the Dolby Surround listening
mode. Front high speakers or rear high speakers should
be situated at least 0.9 m higher than the front speakers.
Front high speakers should be situated directly above the
front speakers and the distance between the rear high
speakers should match the distance between the front
speakers. Both should be set up facing the listening
position.
1: 22e to 30e, 2: 120e
Go To "Hookup" (
Ä
P9)
1
2
SN29402195_DRX-2_BAS_En_1602xx.book 5 ージ 2016年2月22日 月曜日 午前1時4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DRX-2 and is the answer not in the manual?

Integra DRX-2 Specifications

General IconGeneral
BrandIntegra
ModelDRX-2
CategoryReceiver
LanguageEnglish

Related product manuals