21
> Specifications > Advanced Setup > Listening Modes
> Network Functions > Basic Manual
|Troubleshooting Supplementary Information, etc.
Setting Item Default Value Setting Details
PCM Fixed Mode Off Select whether to fix input signals to PCM (except
multi-channel PCM) when you have selected
"HDMI", "COAXIAL", or "OPTICAL" in the "Audio
Select" setting. Set this item to "On" if noise is
produced or truncation occurs at the beginning of
a track when playing PCM sources. Select "Off"
normally.
•
Changing "Audio Select" changes the setting to
"Off".
•
The setting cannot be changed when "TUNER" or "NET" input is selected.
■ Video Select
When "TUNER" or "NET" input is selected, you can set the input from which video is
displayed on the TV.
Setting Item Default Value Setting Details
Video Select Last "Last": Select the video input played immediately
prior.
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX",
"PC", "AUX", "CD", "TV", "PHONO": Play the video
from the selected input.
•
This setting is effective for an input selector
which is assigned in "1. Input/Output Assign" -
"HDMI Input" and "Video Input".
•
If the OSD language is set to Chinese, you can only select this setting when
"
TUNER
"
is selected as
input.
5. Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
When the list of input sources is displayed, set the signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value Setting Details
Analog/PCM All Ch Stereo Set the listening mode for playing PCM signals of
CD and analog signals of record and cassette tape.
Dolby Dolby Surround Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
•
Input signals are played as they are input if you
select "Straight Decode".
DTS
DTS Neural:X
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
•
Input signals are played as they are input if you
select "Straight Decode".
Other Dolby Surround Set the listening mode for playing audio such as
DVD-audio and DSD signals.
•
Input signals are played as they are input if you
select "Straight Decode".
•
Available listening modes vary depending on speaker configuration and the input signal.
•
Setting "Last Valid" will always select the last selected mode.
•
Only "Analog" can be set to the "TUNER" input.
•
"Digital", "Dolby" and "DSD" can be set to the "NET" input.
To Next Page
Loading...
Need help?
General
