Integra DRX-7.1 User Manual

35
> Specifications > Advanced Setup > Listening Modes
> Network Functions > Basic Manual
|Troubleshooting Supplementary Information, etc.
Setting Item Default Value Setting Details
NET Main/Zone 2/
Zone 3
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
NET
" is selected as input for
main room.
"Zone 2": Output when "
NET
" is selected as input
for ZONE2.
"Main/Zone 2": Output when "
NET
" is selected as
input for main room or ZONE2
.
"
Zone 3
"
: Output when
"NET"
is selected as
input
for ZONE3.
"
Main/Zone 3
"
: Output when
"NET"
is selected as
input for main room or ZONE3.
"
Zone 2/Zone 3
"
: Output when
"NET"
is selected as
input for ZONE2 or ZONE3.
"
Main/Zone 2/Zone 3
"
: Output when
"NET"
is
selected as input for main room, ZONE2 or
ZONE3.
7. Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ 1. Zone 2
Setting Item Default Value Setting Details
Output Level Fixed Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Maximum Volume Off Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99". (When "3. Audio Adjust" - "Volume" - "Volume
Display" is set to "Absolute")
Power On Volume Last Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (Volume level
when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" -
"Volume Display" is set to "Absolute")
•
You cannot set a higher value than that of
"Maximum Volume".
■ 2. Zone 3
Setting Item Default Value Setting Details
Output Level Fixed Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Maximum Volume Off Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99". (When "3. Audio Adjust" - "Volume" - "Volume
Display" is set to "Absolute")

Integra DRX-7.1 Specifications

General

Brand	Integra
Model	DRX-7.1
Category	Receiver
Language	English