> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
57
Audio Inputs
Digital
OPTICAL IN1 (GAME), IN2 (TV/TAPE)
COAXIAL IN (CD)
Analog
IN1 (PC), IN2 (TV/TAPE), IN3 (CD), PHONO
Audio Outputs
Analog
ZONE2 LINE OUT
2 SUBWOOFER PRE OUT
Speaker Outputs
SPEAKERS A: FRONT L/R
SPEAKERS B: FRONT L/R
(Compatible with banana plugs)
Phones
Phones (Front, Ø1/4z/6.3 mm)
Others
USB: 2 (Front: Ver.2.0, 5 V/1 A, Rear: Ver.2.0, 5 V/
500 mA)
Ethernet: 1
RI REMOTE CONTROL: 1
RS232: 1
12V TRIGGER OUT: 2 (A: 100 mA, B: 25 mA)
IR IN: 1
IR OUT: 1
Power consumption in standby mode
In the following cases, the power consumption in standby
mode may reach up to a maximum of 15 W:
– When "Network Standby" is set to "On"
– When "HDMI CEC" is set to "On"
– When "HDMI Standby Through" is set to other than "Off"
– When "Bluetooth Wakeup" is set to "On"
– When "USB Power Out at Standby" is set to "On"
To Next Page
Loading...
Need help?
General
