Advanced Operations
En-68
Zone 2
In addition to the main listening room, you can also enjoy playback in another room, or as we call Zone 2. And, you can select a different source for each room.
Connecting Your Zone 2 Speakers Directly to the AV receiver
This setup allows you to select different sources for Main room and Zone 2. This is
called Powered Zone, as the Zone 2 speakers are powered by the AV receiver.
Note
• With this setup, the volume of Zone 2 is controlled by the AV receiver.
• When Powered Zone 2 is used, playback in the main room is reduced to 5.1 channels.
Connecting the Zone Speakers to an Additional Amplifier
This setup allows 7.1-channel playback in your main listening room and 2-channel
stereo playback in Zone 2.
Note
• With the default settings, the Zone 2 volume must be set on the Zone 2 amplifier. If your
Zone 2 amplifier has no volume control, change the setting so that you can set the Zone 2
volume on the AV receiver. See “Multi Zone” (➔ page 63).
Making Zone 2 Connections
To use this setup, you must activate the Powered Zone 2 setting (➔ page 54).
LR
TV
AV receiver
Zone 2
Main room
IN
R
L
Main room
TV
Zone 2
AV receiver
Receiver/
integrated amp
To Next Page
Loading...
