Integra DTR-5.3 User Manual

65
Controlling an Integra/Onkyo MD recorder
The connector of the Integra/Onkyo MD recorder must be
connected to the DTR-6.3/5.3 (see page 29).
1. Press the MD Mode button.
The MD Mode button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Integra/Onkyo MD
recorder.
Operation buttons:
On: Turns on and off MD player (same as the Standby button on the
remote controller)
: Track down
: Track up
: Play
: Stop
: Skip backward
: Skip forward
Rec: Record
: Pause
: Eject
1 to 9, 0, --/---: Numeric keys
Enter: Enters settings
You may also use the following buttons:
VOL : Adjusts volume at DTR-6.3/5.3
Muting: Activates muting function at DTR-6.3/5.3
Using remote controller
MD Mode
VOL
Muting
MD
operation
buttons
On Standby
Enter
Numeric keys

Integra DTR-5.3 Specifications

General

Brand	Integra
Model	DTR-5.3
Category	Receiver
Language	English