Do you have a question about the Integra DTR-6.4/5.4 and is the answer not in the manual?
Input Sensitivity | 200 mV |
---|---|
Signal-To-Noise Ratio | 100 dB |
Total Harmonic Distortion | 0.08 % |
Surround Sound Formats | Dolby Digital EX, DTS Neo:6 |
Input Impedance | 47 kΩ |
Frequency Response | 5 Hz - 100 kHz (+1 dB, -3 dB) |
Video Inputs/Outputs (Composite) | 4 inputs / 1 output |
Video Inputs/Outputs (Component) | 2 inputs / 1 output |
Audio Inputs/Outputs (Coaxial) | 2 inputs / 1 output |
Frequency Response (Direct mode) | 5 Hz - 100 kHz (+1 dB, -3 dB) |
Instructions for connecting the unit's power cord to the AC inlet and outlet.
How to use buttons for menu navigation, selection, and adjustment.
Initial settings for speakers, IR input, and TV format.
Setting speaker size, type, and crossover frequency for optimal sound.
Configuring digital input sources and intelligent volume levels.
Fine-tuning bass, treble, and other audio parameters based on listening mode.
Solutions for common problems encountered with the unit or remote.