Step 2 of 2: TLS Server
1. Select one of the following credential retrieval methods: Validate Server Certificate
or Specify Server or
Certificate Name.
2. Click OK. The profile is added to the Profiles list.
3. Click the new profile at the end of the Profiles list. Use the up and down arrows to change the priority of the
new profile.
4. Click Connect to connect to the selected wireless network.
5. Click OK to close the utility.
Create a Profile with TTLS Network Authentication
TTLS authentication: These settings define the protocol and credentials used to authenticate a user. The client
uses EAP-TLS to validate the server and create a TLS-encrypted channel between the client and server. The client
can use another authentication protocol. Typically, password-based protocols challenge over a non-exposed TLS
encrypted channel.
Profile Mapping
This profile will be exported differently to clients running Windows* XP as compared to Windows Vista* and
Windows* 7. See
TTLS Profile Mapping for more information.
To Create a Profile with TTLS Authentication
Intel® PROSet/Wireless WiFi Connection Utility User's Guide
To Next Page
Loading...
