EasyManua.ls Logo

Intel BLKD101GGCL - Tables; 1 Product Description; Overview; Feature Summary

Intel BLKD101GGCL
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Intel Desktop Board D101GGC Technical Product Specification
10
1.1 Overview
1.1.1 Feature Summary
Table 1 summarizes the major features of the board.
Table 1. Feature Summary
Form Factor
microATX (9.60 inches by 8.60 inches [243.84 millimeters by 218.44 millimeters])
Processor
Support for the following:
• Intel
®
Pentium
®
4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
®
Celeron
®
D processor in an LGA775 socket with a 533 MHz system bus
Memory
• Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR 400 MHz and DDR 333 MHz DIMMs
• Support for up to 2 GB of system memory
Chipset
• ATI Radeon* Xpress 200 Northbridge
• ATI IXP 450 Southbridge
• 4 Mbit Firmware Hub (FWH)
Video
ATI Radeon Xpress 200 Northbridge
Audio
High Definition Audio subsystem using the Realtek ALC861 audio codec
Legacy I/O Control
SMSC SCH5017 Legacy I/O controller for hardware management, diskette drive,
serial, parallel, and PS/2* ports
USB
Support for USB 2.0 devices
Peripheral
Interfaces
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
LAN Support
10/100 Mbits/sec LAN subsystem using the Realtek 8101L LAN adapter device
BIOS
AwardBIOS* for Intel
®
resident in the 4 Mbit FWH
Expansion
Capabilities
• Two PCI Conventional* bus connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 bus add-in card connector
Instantly Available
PC Technology
• Support for PCI Local Bus Specification Revision 2.2
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
Hardware Monitor
Subsystem
(controlled by SMSC
SCH5017 I/O
controller)
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan connectors
• Three fan sense inputs used to monitor fan activity
• Fan speed control
For information about Refer to
Available configurations for the Desktop Board D101GGC Section 1.2, page 14

Table of Contents