EasyManua.ls Logo

Intel D915GLVG - LAN Connector LED Locations; LAN Subsystem; 10;100 Mbits;Sec LAN Subsystem

Intel D915GLVG
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product Description
29
1.9 LAN Subsystem
The LAN subsystem consists of the following:
• Physical layer interface device Intel
®
82562GZ PLC for 10/100 Mbits/sec Ethernet LAN
connectivity.
• RJ-45 LAN connector with integrated status LEDs
Additional features of the LAN subsystem include:
• CSMA/CD protocol engine
• LAN connect interface that supports the 82562GZ
• PCI Conventional bus power management
⎯ Supports ACPI technology
⎯ Supports LAN wake capabilities
1.9.1 10/100 Mbits/sec LAN Subsystem
The 10/100 Mbits/sec LAN subsystem includes the ICH6, the Intel 82562GZ PLC, and an RJ-45
LAN connector with integrated status LEDs.
1.9.1.1 Intel
®
82562GZ Physical Layer Interface Device
The Intel 82562GZ provides the following functions:
• Basic 10/100 Ethernet LAN connectivity
• Full device driver compatibility
• Programmable transit threshold
• Configuration EEPROM that contains the MAC address
1.9.1.2 RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 11).
Green LED
Yellow LED
OM15076
Figure 11. LAN Connector LED Locations

Table of Contents