37
2 Technical Reference
What This Chapter Contains
2.1 Memory Map................................................................................... 37
2.2 Connectors and Headers................................................................... 40
2.3 Jumper Block .................................................................................. 50
2.4 Mechanical Considerations ................................................................ 51
2.5 Electrical Considerations................................................................... 52
2.6 Thermal Considerations.................................................................... 53
2.7 Reliability ....................................................................................... 55
2.8 Environmental ................................................................................ 56
2.1 Memory Map
2.1.1 Addressable Memory
The board utilizes 8 GB of addressable system memory. Typically the address space
that is allocated for PCI Conventional bus add-in cards, PCI Express configuration
space, BIOS (SPI Flash), and chipset overhead resides above the top of DRAM (total
system memory). On a system that has 8 GB of system memory installed, it is not
possible to use all of the installed memory due to system address space being
allocated for other system critical functions. These functions include the following:
• BIOS/ SPI Flash (8 Mbits)
• Local APIC (19 MB)
• Digital Media Interface (40 MB)
• Front side bus interrupts (17 MB)
• PCI Express configuration space (256 MB)
• GMCH base address registers, internal graphics ranges, PCI Express ports (up to
512 MB)
• Memory-mapped I/O that is dynamically allocated for PCI Conventional and PCI
Express add-in cards
• Intel Management Engine support (6 MB)
• Base graphics memory support (1 MB or 8 MB)
To Next Page
Loading...
Need help?
General
