Intel ETHEREXPRESS PRO/100 User Manual

Windows 95 Installation 2-15
Caution
Under most circumstances it will not be necessary to make
modifications directly to the registry. Incorrect settings can
result in undesirable changes to the configuration of Windows
95 or NT.
The registry parameters are as follows:
Keyword Default Valid Values
DEVICEVXDS M16B.SYS
DEVLOADER NDIS
DIRECTENABLE 0 0-1
DRIVERDESC INTEL ETHEREXPRESS PRO/100
LAN+MODEM PC CARD (NETWORK)
EARLYTRANSMIT 1 0-1
ENUMPROPPAGES NETDI.DLL,ENUMPROPPAGES
FULLDUPLEX 0 0-1
FUNCTIONENABLE 0 0-2
INFPATH NETM16B.INF
INTERRUPTNUMBER 04 00 00 00
IOBASEADDRESS 02 00 00 00
LINESPEED 0 0-2
LINKINTEGRITY 1 0-1
MEMORYBASEADDRESS 01 00 00 00
MODE 0 0-1
NETWORKADDRESS
PLATFORMTYPE 1 1
TRANSMITBUFFERSIZE 11264 1024-29696
InterruptNumber, IoBaseAddress, and MemoryBaseAddress are NOT
user-configurable and their values are assigned by the Windows 95
Configuration Manager.

Intel ETHEREXPRESS PRO/100 Specifications

General

Device Type	Network adapter
Form Factor	Plug-in card
Data Link Protocol	Ethernet, Fast Ethernet
Data Transfer Rate	100 Mbps
Compliant Standards	IEEE 802.3, IEEE 802.3u
Connector Type	RJ-45
Bus Type	PCI
Chipset	Intel 82557
Full Duplex Support	Yes
Wake-on-LAN Support	Yes
Ports	1 x RJ45
Data Rate	10 Mbps / 100 Mbps
Operating Systems Supported	Linux, Windows