Intel ETHEREXPRESS PRO/100 User Manual

4-42 PRO/100 LAN+Modem PC Card User’s Guide
Refer to your network documentation for instructions on how to install
the packet driver with your network.
Keywords are not case sensitive, and can be abbreviated to a unique
sequence of initial characters (for example, IN for INTERRUPT).
Packet Driver Keywords
KEYWORD DEFAULT VALID VALUES
COMX AUTO (X = 1, 2, 3, OR 4)
COMIRQ= AUTO (3 TO 15)
COMBASE= AUTO (0X248 TO 0X3F8)
INTERRUPT= AUTO (3 - 15)
IOADDRESS= AUTO (240 - 380)
IOWAITSTATES= 0 (1 - 3)
LINESPEED= AUTO (10 OR 100)
LINKDISABLE (NO KEYWORD = LINK INTEGRITY ENABLED)
MEMORY= AUTO (C0000 - E8000)
MEMWAITSTATES= 0 (1 - 3)
MODE= MEM (MEM OR IO)
NOCHECK (NO KEYWORD = ADAPTER RESOURCE VERI
FICATION ENABLED)
NOCOM (NO KEYWORD = MODEM ENABLED)
NOEARLYRX (NO KEYWORD = EARLYRX ENABLED)
NOEARLYTX (NO KEYWORD = EARLYTX ENABLED)
NOLED (NO KEYWORD = LEDS ENABLED)
SHAREIRQ
SINT 60 (60 - 80)
SOCKET= AUTO (1 - 4)
WORDSIZE= 16 (8 OR 16)
Packet Driver Example
A typical sequence for loading the packet driver M16BPD.COM with
default configuration settings is as follows:
M16BPD
ETHDRV

Intel ETHEREXPRESS PRO/100 Specifications

General

Device Type	Network adapter
Form Factor	Plug-in card
Data Link Protocol	Ethernet, Fast Ethernet
Data Transfer Rate	100 Mbps
Compliant Standards	IEEE 802.3, IEEE 802.3u
Connector Type	RJ-45
Bus Type	PCI
Chipset	Intel 82557
Full Duplex Support	Yes
Wake-on-LAN Support	Yes
Ports	1 x RJ45
Data Rate	10 Mbps / 100 Mbps
Operating Systems Supported	Linux, Windows