Windows 3.x/MS-DOS Installation 4-41
NDIS 2.0.1 Keywords (M16BNDIS.EXE)
KEYWORD DEFAULT VALID VALUES
COMX AUTO (X = 1, 2, 3, OR 4)
COMIRQ= AUTO (3 TO 15)
COMBASE= AUTO (0X248 TO 0X3F8)
DRIVERNAME=INTEL$ (REQUIRED FIRST ITEM IN PROTOCOL.INI)
INTERRUPT= AUTO (3 - 15)
IOADDRESS= AUTO (240 - 380)
IOWAITSTATES= 0 (1 - 3)
LINESPEED= AUTO (10 OR 100)
LINKDISABLE (NO KEYWORD = LINK INTEGRITY ENABLED)
MEMORY= AUTO (C0000 TO EE000)
MEMWAITSTATES= 0 (1 - 3)
MODE= MEM (MEM OR IO)
NOCHECK (NO KEYWORD = ADAPTER RESOURCE VERI
FICATION ENABLED)
NOCOM (NO KEYWORD = MODEM ENABLED)
NOEARLYRX (NO KEYWORD = EARLY RECEIVE ENABLED)
NOEARLYTX (NO KEYWORD = EARLY TRANSMIT ENABLED)
NOLED (NO KEYWORD = LEDS ENABLED)
SHAREIRQ
SOCKET= AUTO (1 - 4)
WORDSIZE= 16 (8 OR 16)
Packet Driver Settings (for driver
M16BPD.COM)
Packet driver parameters must be stated on the M16BPD.COM command
line when running the packet driver.
Packet Driver Configuration Notes
The Intel packet driver M16BPD.COM conforms to FTP Softwares
public domain packet-driver specification. It is a DOS-based terminate-
and-stay-resident (TSR) program. The driver file M16BPD.COM is located
in the \PKTDRV directory on Disk 2, Network Drivers Disk.
To Next Page
Loading...
