Intel G31 Series User Manual

- 20 -
G31 Series User's Manual
• Type
Use this item to congure the type of the IDE device that you specify.
• LBA/Large Mode
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
• Block (Multi-Sector Transfer)
Enables or disables data multi-sectors transfers. When set to [Auto] , the data transfer from
and to the device occurs multiple sectors at a time if the device supports multi-sector transfer
frature. When set to [Disabled] , the data transfer from and to the device occurs one sector at
a time.
• PIO Mode
Allows you to select the data transfer mode.
• DMA Mode
Selects the DMA mode.
• S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting Technology.
• 32Bit Data Transfer
Enables or disables 32-bit data transfer.
・
Press <Esc> key to return to "Main" menu.
4.5.4 Advanced setting
BIOS SETUP UTILITY
Main Advanced Boot Security Power JUSTw00t! Exit
Advanced Settings Configure CPU.
←
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
►
CPU Configuration
►
Chipset
►
Onboard Device
►
PCIPnP
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Intel G31 Series Specifications

General

Brand	Intel
Model	G31 Series
Category	Motherboard
Language	English