Intel Desktop Board DN2800MT Product Guide
24
Installing a PCI Express Mini Card in the PCI
Express Full-/Half-Mini Card Slot
A PCI Express Full-Mini or Half-Mini Card can be installed in the Desktop Board’s PCI
Express Full-/Half-Mini Card slot.
To install a PCI Express Full-Mini Card in this slot, see Figure 8 and follow these steps:
1. Observe the
precautions in "Before You Begin" on page 15.
2. Locate
the PCI Express Full-/Half-Mini Card slot (Figure 1, AA).
3. Insert the card into the PCI Expres
s Mini Card connector (Figure 8, A) at a slightly
upward
angle.
4. Align the mounting holes and secure the card in place (Figure 8, B).
T
o install a PCI Express Half-Mini Card in this slot, see Figure 8 and follow these steps:
1. Observe the
precautions in "Before You Begin" on page 15.
2. Locate
the PCI Express Full-/Half-Mini Card slot (Figure 1, AA).
3. If necessary, move the
mounting standoffs to the location shown in Figure 8, C.
4. Insert the card into the PCI Expres
s Mini Card connector (Figure 8, D) at a slightly
upward
angle.
5. Align the mounting holes and secure the card in place (Figure 8, E).
To Next Page
Loading...
