47
Step3.
How to make a RAID driver diskette?
1: Insert the diskette which is being formatted in floppy drive on a system which can start OS.
2: After booting OS insert the bundle CD in your CD-ROM
3: Copy all the files from \Intel\RAIDDisk to boot diskette
Once you have the SATA driver diskette ready, you may start to install Windows XP,
Windows 2000 , Vista or Windows 7 on your System.
Installation of Windows OS
For installation of Windows OS, please insert Windows OS CD into the CD-ROM drive.
Then remove the boot diskette, and boot the system. At the very beginning, you will see the
message at the bottom of screen, “Press F6 if you need to install a third party SCSI or RAID
driver….”
At this moment, please press <F6> key and follow the instructions of Windows XP/2000 for
the proper installation.
If you are Windows 7 /Vista OS, please load SATA RAID driver from this location.
To Next Page
Loading...
Need help?
General
