Using the Setup Program
42
Diskette Options
This submenu is for configuring diskette drives.
Table 10. Diskette Options
Feature Options Description
Diskette Controller • Disabled
• Enabled (default)
Disables or enables the integrated
diskette controller.
Diskette A: • Disabled
• 360 KB, 5¼″
• 1.2 MB, 5¼″
• 720 KB, 3½″
• 1.44/1.25 MB, 3½″ (default)
• 2.88 MB, 3½″
Specifies the capacity and physical size
of diskette drive A.
Diskette Write Protect • Disabled (default)
• Enabled
Disables or enables write protect for the
diskette drive(s).
DMI Event Logging
This submenu is for configuring the DMI event logging features.
Table 11. DMI Event Logging Submenu
Feature Options Description
Event log capacity No options Indicates if there is space available in the event log.
Event log validity No options Indicates if the contents of the event log are valid.
View DMI event log No options Enables viewing of DMI event log.
Clear all DMI event logs • No (default)
• Yes
Clears the DMI event log after rebooting.
Event Logging • Disabled
• Enabled (default)
Enables logging of DMI events.
ECC Event Logging • Disabled
• Enabled (default)
Enables logging of ECC events.
Mark DMI events as read No options Marks all DMI events as read.
To Next Page
Loading...
