Using the Setup Program
44
Security Menu
This menu is for setting passwords and security features.
Table 14. Security Menu
Feature Options Description
User Password Is No options Reports if there is a user password set.
Supervisor Password Is No options Reports if there is a supervisor password set.
Set User Password Password can be up to seven
alphanumeric characters.
Specifies the user password.
Set Supervisor Password Password can be up to seven
alphanumeric characters.
Specifies the supervisor password.
Clear User Password No Options Clears the user password.
User Setup Access • None
• View Only
• Limited Access
• Full Access (default)
Enables or disables User Setup Access.
None
prevents the user from accessing
Setup.
Unattended Start • Disabled (default)
• Enabled
Enables the unattended start feature. When
enabled, the computer boots, but the
keyboard is locked. The user must enter a
password to unlock the computer or boot
from a floppy diskette.
Power Menu
This menu is for setting power management features.
Table 15. Power Menu
Feature Options Description
Power Management • Disabled
• Enabled (default)
Enables or disables the BIOS power
management feature.
Inactivity Timer • Off (default)
• 1 Minute
• 5 Minutes
• 10 Minutes
• 20 Minutes
• 30 Minutes
• 60 Minutes
• 120 Minutes
Specifies the amount of time before the
computer enters standby mode.
Hard Drive • Disabled
• Enabled (default)
Enables power management for hard disks
during standby and suspend modes.
VESA Video Power Down • Disabled
• Standby (default)
• Suspend
• Sleep
Specifies power management for video during
standby and suspend modes.
Fan Always On • No (default)
• Yes
Select
Yes
to force the fan to remain on when
the system is in a power managed state.
To Next Page
Loading...
Need help?
General
