34 Intel Server Board STL2 Product Guide
Setup Menus
To: Press
Get general
help
<F1> or <Alt+H>
Move between menus
← →
Go to the previous item
↑
Go to the next Item
↓
Change the value of an item + or -
Select an item or display a submenu <Enter>
Leave a submenu or exit Setup <Esc>
Reset to Setup defaults <F9>
Save and exit Setup <F10>
When you see this: What it means
On screen, an option is shown but you
cannot select it or move to that field.
You cannot change or configure the option in that menu screen.
Either the option is autoconfigured or autodetected, or you must
use a different Setup screen.
On screen, the phrase Press Enter
appears next to the option.
Press <Enter> to display a submenu that is either a separate full
screen menu or a popup menu with one or more choices.
The rest of this section lists the features that display onscreen after you press <F2> to enter Setup.
Not all of the option choices are described, because (1) a few are not user selectable but are
displayed for your information, and (2) many of the choices are relatively self explanatory.
Main Menu
You can make the following selections on the Main Menu itself. Use the submenus for other
selections.
Feature Choices Description
System Time HH:MM:SS Sets the system time.
System Date MM/DD/YYYY Sets the system date.
Diskette A Disabled
1.44/1.25 MB
Selects the diskette type.
Diskette B Disabled
1.44/1.25 MB
Selects the diskette type.
Hard Disk Pre-Delay
Disabled
Enabled
Adds a delay before first access of the hard drive.
Primary Master Enters submenu.
Primary Slave Enters submenu.
Processor Speed N/A Enters submenu.
Language
English (US)
Français
Deutsch
Italiano
Español
Selects which language BIOS displays.
To Next Page
Loading...
Need help?
General
